Working With Excellent

The best professionals
for your project

Who we are UMSCO is a leader company specialized in delivering all kinds of Maintenance solutions & Engineering services.

Hire qualified professionals for your projects

Who we are UMSCO is a leader company specialized in delivering all kinds of Maintenance solutions & Engineering services.

What we do Our aim is to develop, improve, implement and evaluate integrated systems from the following aspects: equipment minimum cost supply, equipment performance, services, installation along with information and knowledge increase

Our Vision: believe that we are one of the main contributors that improve our economic growth through high technology, professionalism, honesty, hard work.

Our Mission: Is to provide highly innovative solutions and services that cover industrial needs with effective cost.

Our Value:

Our Strategies

Achieve our target along with increasing our profitability and our stakeholder’s welfare.

Set the proper implementation plan that ensures our defined objectives accomplishments effectively.

Design methods to maintain progress

Maintain an aggressive growth strategy

Our Work

Our Services


Supply, install and maintain an overhead crane or a bridge crane, What type of crane Do I need?

Wireless Industrial Remote

UMSCO Supply and install Wireless Industrial Remote Control ,What is industrial radio control?

Aluminum Cooling Solutions

As a leader in thermal management technologies, UMSCO Design, supply and install

Exchange Heaters

UMSCO design, supply , Re-tube and replacement complete tube bundle for heat exchanger.


UMSCO had long experience for the condenser retubing. The condenser is a water-cooled shel


UMSCO Supply and retubing boilers. A boiler is a closed vessel in which water or other fluid is heated.

Pipe and Tubes

Tube and Pipe are two remarkably similar cylindrical “materials” that are used for a wide variety of applications.

Instruments Calibration

UMSCO can calibrate various types of pressure, temperature, level & flow transmitters.

Scada Systems

UMSCO can supply and maintain scada supervisory control and data acquisition systems.

Flare gas measurement

UMSCO can supply and install flare gas meters

Our Partners

Our Clients

Get in touch

We’re here to help answer any questions you might have; please fill in all the fields below. We look forward to hearing from you.

Our Contact

+20 0100 66 271 88​

+202 70 33 831​

Building No. 11G/4
EL - Laselky, Front of Gate 3, Technology Village, New Maadi

Social Media


The following questions help to understand the types of lifting systems available

  1. project 1
  2. Lifting height
  3. Working class (how many hours the crane will work in one working day).
  4. Working environment (temperature, humidity, elevation)
  5. How many axes of hook movement I need(e.g., up/down, left/right, and forward/back) one , two or three.
  6. If two axes how long runway? if three axes how long of runway and width?.

Below we provide some basic information about each type of crane, but the UMSCO sales team and engineers will be more than happy to assist you through the process of choosing the right lifting system.

  1. Monorail:

    With a monorail system, the hoist and trolley run on a single stationary beam. Because of their inherent speed and efficiency, monorail systems are an effective method of moving and positioning loads to specific locations. provides two axis of hook motion (X and Y).

  2. Over Head crane:

    A bridge crane runs on an elevated runway system along the length of a factory and provides three axis of hook motion (X, Y, and Z). Types of Bridge Cranes :Top Running Bridge Crane, Underhung Bridge Crane ,single girder and double girder.

  3. Jib cranes:

    This type of crane consists of a pivoting head and boom assembly which carries a hoist and trolley unit. The pivoting head is supported either by a floor-mounted mast providing up to 360 degree.

  4. Gantry cranes:

    Usually considered when there is a reason not to incorporate an overhead runway system. These are typically used for an outdoor application or below an existing overhead bridge crane system. Gantries can run on track, rail, or directly on the floor, depending on required usage, length of travel and load capacities.

  5. Download Inquiry:

    Gantry Crane Inquiry

    Overhead Crane Inquiry

Wireless Industrial Remote Control

Industrial radio control has much in common with radio control in which we are accustomed to in our daily life, such as garage door openers, remote controls to our TV sets or control of radio controlled toys. In principle they function in the same way. A radio transmitter sends out radio waves which correspond to a binary command for the button you press. A radio module in the receiver receives the radio wave and interprets it, which in turn performs a command, for example lowers a hook from an overhead crane, opens a gate or turns on a lamp. One of the challenges with radio is that an great number of radio waves travel through the air at the same time. so the digital codes in the radio wave, which the receiver is expecting. Should the radio wave be on the wrong frequency, or lack the binary code, the receiver will not perform any commands. 

Aluminum Cooling Solutions

As a leader in thermal-management technologies, UMSCO Design, supply and install Aluminum Cooling Solutions the modular heat exchangers and cooling systems are adapted to the customers’ needs and are developed together with them for :

  1. Radiators (HT, LT)
  2. Coolers (engine, hydraulic, transmission, etc.)
  3. Charge air coolers
  4. Compressed air coolers
  5. Fuel coolers
  6. Condensers
  7. Constructive Solutions
  8. Plate&Bar, Tube&Fin, Shell, Brazed plates


  1. Agricultural equipment
  2. Forestry equipment
  3. Construction equipment
  4. Mining equipment
  5. Buses and coaches
  6. Commercial vehicles
  7. Compressors
  8. Automotive
  9. Hydraulic equipment
  10. Power generation
  11. Engines
  12. Industrial equipment

Exchange Heaters

A heat exchanger is a device used to transfer heat between a solid object and a fluid, or between two or more fluids. The fluids may be separated by a solid wall to prevent mixing or they may be in direct contact.

Main Types of Heat Exchangers

  1. Shell and Tube Heat Exchanger
  2. Plate Heat Exchanger
  3. Regenerative Heat Exchanger
  4. Adiabatic Wheel Heat Exchanger



Pipe and Tubes

Instruments Calibration

Certification of the calibration tools according to ISO 17025.

Finally gas chromatography & Dew point Analyzers calibration.

Scada Systems

Control room operators using high-performance SCADA software can spend less time navigating, find critical alarms easier and increase productivity.

Flare gas measurement

Depending on your application, UMSCO can provide ultrasonic flare meters or thermal flare meters.